The AK-DinRail-Server-LXL has two serial RS232 and two RS485 interfaces. Each of these interfaces can be set individually, whereby data rates of up to 1,000,000 baud are supported. In addition, emulations such as Auto-Connect, Connect-On-Data, TCP/UDP client with up to 10 parallel connections and TCP/UDP server can be set. An additional USB-A port allows the internal memory to be expanded or USB devices to be controlled via the network. The server can be easily mounted on any 35 mm DIN EN 60715 (50022) DIN rail and is only 22.5 mm wide. You get ssh access for an administrator user and can use it to develop, install or configure your own programmes. In addition, the AK-Nord image contains the opkg package manager, which allows the installation of almost any Linux package. A pre-installed web server also allows you to set up your own web admin interface and, if you wish, you can also obtain root access for the AK-Nord image or build your own Linux image.
Power supply
7-60 volts / 0.96 watt
Temperature range
-40°C to + 70°C
Dimensions
22.5 x 120 mm(WxH)
1 x Ethernet
10/100Mbit RJ45(M-DIX)
1x USB-A Jack
2 x RS232 and 2 xRS485
Baud rate : up to 1M baud
DataBits : 7.8
Parity : Odd,Even,None,Mark,Space
RS232 Signals : TXD, RXD, RTS, CTS, DSR, DTR, DCD,RI, GND
RS485 Signals : TXD, RXD,GND
WLAN optional
Supported protocols
IPv4, IPv6, TCPv4, UDPv4,TCPv6, UDPv6, FTP, TFTP, ICMPv4, ICMPv6, ARP, NDP, SNMP, LPR, DHCPv4, DHCPv6, BOOTP, DNS, TELNET, HTML, http, DYNDNS, SMTP, POP3, SYSLOG, NetBios-NS, LLMNR, ZeroConfig(AutoIP), IP-Multicast
Emulations and functions
Modem Emulation
Connect-On-Data
Auto-Connect
Tunnel-Mode
DYNDNS-Client
FTP-Server
FTP-Client
LPR-Server
20KB Flashdrive
Flash-File-System
TCP/UDP-Client
TCP/UDP-Server
SYSLOG-Client
