Due to its extremely little dimensions of only 22 x 31 mm and its compact type, the XT-PICO-SPE-SXL embedded network module is particularly suitable to be integrated even in very small terminals. A total of two bus systems is made available with five switchable interfaces each such as RS232, RS485, I2C, SPI and TTL-IO.
Only one additional connector is required. All other SPE components like Phyther etc. have already been integrated. With SPE you can bridge a distance >1000m from your end device to the first switch.
Power supply:
3.3Volt / ca. 170 mA
Dimensions
20 x 31 mm
Temperature range:
-40°C .. + 85°C
1 x Single Pair Ethernet(SPE)
10 Half Duplex
10 Full Duplex
Master/Slave
AutoSensing
2 x RS232 (TTL)
Data rate : up to 2.5 MBaud
Datenbits: 7-8Bit
Parity: Odd,Even,Mark,Space,None
Signals: TXD, RXD, RTS, CTS, DSR, DTR ,DCD,RI, GND
2 x RS485 (TTL)
Data rate : up to 2.5 MBaud
Datenbits: 7-8Bit
Parity: Odd,Even,Mark,Space,None
Signals: TXD, RXD,RS485-RW
2 x I2C (TTL)
Data rate : 100KHz up to 2.5MHz
Datenbits: 8Bit:
MasterMode
Signale: SLC,SDA
2 x SPI (TTL)
Data rate : up to 25MBit (Master)
Datenbits: 8-16Bit
Mode: Master/Slave - Mode
Signals: SCK,SS,MISO,MOSI
2 x TTL-IO (TTL)
7/8 Bit digital Input/Output
Security
SSLv3, TLS1.0, TLS1.1, TLS1.2, IEEE 802.1X
Supported protocols:
IPv4, TCP, UDP, FTP, TFTP, ICMP, ARP, SNMP, LPR, DHCP, BOOTP, DNS, TELNET, HTML, http, DYNDNS, SMTP, POP3, SYSLOG, IPv6, NDP, ICMPv6, DHCPv6, TCPv6, UDPv6, Netbios-NS, LLMNR, ZeroConfig(AutoIP), IP-Multicast, AK-M2M, SSL 3.0, TLS1.0, TLS1.1, TLS1.2, IEEE 802.1X
Emulations and functions:
Modem Emulation, Connect-On-Data, Auto-Connect, Tunnel-Mode ,DYNDNS-Client , FTP-Server, FTP-Client, LPR-Server, I2C - Master, SPI - Master / Slave, TTL - IO, 512 KB Flashdrive, Flash-File-System, SD- und DF-CARD, 4bit- und SPI - DISPLAY, E-Mail - Client, TCP/UDP -Client, TCP/UDP -Server, SYSLOG-Client
