Embedded-Module

The XT-FEMTO-SXL is a very small embedded network module which can be easily integrated into any terminal. The XT-FEMTO-SXL embedded network module with the dimensions 27 x 27 x 3mm, can be built-in as SMD or as THT component and be used in your switching directly or optionally. A total of two bus systems with five switchable interfaces such as RS232, RS485, I2C, SPI as well as TTL-IO will be made available. With only a few additional components such as a RJ45 jack with an integrated transducer and a 3.3 volts power supply your terminal will be immediately network-compatible and can be accessed world-wide.

Connectors
1 x Ethernet 10/100Mbit RJ45(MDIX)
2 x BUS(TTL) with RS232 / RS485 / I2C / SPI or TTLIO

Security
SSLv3, TLS1.0, TLS1.1, TLS1.2, IEEE 802.1X

The XT-FEMTO-SPE-SXL is a very small embedded network module which can be easily integrated into any terminal. The XT-FEMTO-SPE-SXL embedded network module with the dimensions 27 x 27 x 3mm, can be built-in as SMD or as THT component and be used in your switching directly or optionally. A total of two bus systems with five switchable interfaces such as RS232, RS485, I2C, SPI as well as TTL-IO will be made available. With only a few additional components, such as a 3-pin connector and a 3.3Volt power supply, your end device is immediately network-compatible and accessible worldwide. You can bridge distances >1000m from your end device to the first switch.

Connectors
1 x Single Pair Ethernet(SPE)
2 x BUS(TTL) with RS232 / RS485 / I2C / SPI or TTLIO

Security
SSLv3, TLS1.0, TLS1.1, TLS1.2, IEEE 802.1X

XT-ATTO-LXL is a very small embedded network module, which can be easily integrated into any end device. The XT-ATTO-LXL embedded network module has the dimensions of 26 x 30 x 3mm, can be installed via a 67-pin M.2 PCI connector and can therefore be used directly or as an option in your circuit. A total of up to 10 interfaces are supported simultaneously such as UART(RS232, RS485), I2C, SPI, QSPI, CAN, Ethernet, PWM, ADC, MDIO, USB, LCD, ISC, PDMIC as well as TTL-IO. With only a few additional components, such as an RJ45 jack with integrated transformer and a 5 Volt power supply, your terminal device becomes immediately network-compatible and accessible worldwide. As OS Linux with kernel version 5.4.81-linux4sam is preinstalled.

Connectors
1 x Ethernet(MDIX)
5 x UART(RS232/RS485) (TTL)
4 x I2C (TTL)
4 x SPI (TTL)
51x GPIO (TTL) digital Input/Output
1 x MDIO
1 x CAN
1 x USB Host 2.0/USB Device
1 x QSPI

Security
SSLv3, TLS1.0, TLS1.1, TLS1.2, IEEE 802.1X

Due to its extremely little dimensions of only 22 x 34 mm and its compact type, the XT-NANO-SXL embedded network module is particularly suitable to be integrated even in very small terminals. A total of two bus systems is made available with five switchable interfaces each such as RS232, RS485, I2C, SPI and TTL-IO. It is even possible to use a POE supply (Power over Ethernet), since all necessary connections are performed. No additional Ethernet components such as Phyther, carrier or RJ45 jack are required, since all necessary components were integrated.

Connectors
1 x Ethernet 10/100Mbit RJ45(MDIX)
2 x BUS(TTL) with RS232 / RS485 / I2C / SPI or TTLIO

Security
SSLv3, TLS1.0, TLS1.1, TLS1.2, IEEE 802.1X

Due to its extremely little dimensions of only 22 x 31 mm and its compact type, the XT-NANO-SPE-SXL embedded network module is particularly suitable to be integrated even in very small terminals. A total of two bus systems is made available with five switchable interfaces each such as RS232, RS485, I2C, SPI and TTL-IO.
No additional SPE components like Phyther etc. or connectors are needed, because all necessary components are integrated.

Connectors
1 x Single Pair Ethernet (SPE)
2 x BUS(TTL) with RS232 / RS485 / I2C / SPI or TTLIO

Security
SSLv3, TLS1.0, TLS1.1, TLS1.2, IEEE 802.1X

Due to its extremely little dimensions of only 22 x 31 mm and its compact type, the XT-PICO-SXL embedded network module is particularly suitable to be integrated even in very small terminals. A total of two bus systems is made available with five switchable interfaces each such as RS232, RS485, I2C, SPI and TTL-IO. It is even possible to use a POE supply (Power over Ethernet), since all necessary connections are performed. Only an additional RJ45 jack is required. All other Ethernet components such as Phyther and carrier were already integrated.

Connectors
1 x Ethernet 10/100Mbit RJ45(MDIX)
2 x BUS(TTL) with RS232 / RS485 / I2C / SPI or TTLIO

Security
SSLv3, TLS1.0, TLS1.1, TLS1.2, IEEE 802.1X

Due to its extremely little dimensions of only 22 x 31 mm and its compact type, the XT-PICO-SPE-SXL embedded network module is particularly suitable to be integrated even in very small terminals. A total of two bus systems is made available with five switchable interfaces each such as RS232, RS485, I2C, SPI and TTL-IO.
Only one additional connector is required. All other SPE components like Phyther etc. have already been integrated. With SPE you can bridge a distance >1000m from your end device to the first switch.

Connectors
1 x Single Pair Ethernet (SPE)
2 x BUS(TTL) with RS232 / RS485 / I2C / SPI or TTLIO

Security
SSLv3, TLS1.0, TLS1.1, TLS1.2, IEEE 802.1X